Workplace Safety: Eye Protection and Safety Glasses


The most common sort of eye protection is safety glasses. I even have always hated wearing safety glasses myself. I notice that folks who have well fitted prescription safety glasses tend to wear theirs without compliant. i feel that’s because they will see better with their glasses on than with them off. i’m the other however. I can see better without my safety glasses so I hate wearing them.

So how does one protect the eyes of individuals like me who are getting to avoid wearing their safety glasses if they will escape with it?

First you’ll work to eliminate the hazards. Why does one allow things that would potentially damage someone’s eye to be flying around within the first place. Look to engineering solutions to vary your process in order that potential hazards are eliminated.

Also check out your work procedures. Is there differently of doing this tasks that eliminates the exposure to potential eye injury?

If the source of the danger can’t be eliminated, check out ways to effectively guard the exposure. There are some ways to make see through guards and covers that might protect the workers for flying particles. the standard problem with these is that they get obscured with dirt and scratches and therefore the vision through the guard is reduced until it becomes ineffective.

Using modern materials and self cleaning systems, vision through the guards are often maintained. you only need to use some creativity. an honest strong preventive maintenance program helps too.

If chemical exposure may be a problem check out using alternate chemical that aren’t eye irritants. Safety glasses actually provide little or no protection to chemical splashes. If you’re trying to guard employees from chemical hazards, fitted goggles or face shields are far more effective.

Of course eye wash stations can’t be overlooked in any situation where eye irritants are within the workplace. Eyewash station must be easily accessible and never allowed to be blocked. make certain ready to “> you’ll access the attention wash station together with your eyes closed as a possible user will likely not be able to see.

Keep your eye wash station clean and flush them regularly. Water pipes that feed them may rust or corrode thanks to infrequent water flow, so confirm that the water source is clean and possibly filtered is debris within the water may be a problem. Inspect and flush all of your eye wash stations a minimum of monthly.

Another was to assist people like me who hate to wear safety glasses is to supply many eye glass cleaning stations equipped with effective eye glass cleaning supplies. I even have found I can tolerate clean glasses far better that smudged ones.

Eyesight may be a precious resource and wishes to be preserved with care make sure that you’ve got done all that you simply can do to assist your employees see clearly.

Related Post

Leave a Reply

Your email address will not be published. Required fields are marked *